rotleague.blogg.se

1. HP LASERJET P4015N MAINTENANCE KIT ROLLERS ONLY HOW TO
2. HP LASERJET P4015N MAINTENANCE KIT ROLLERS ONLY INSTALL
3. HP LASERJET P4015N MAINTENANCE KIT ROLLERS ONLY SKIN

The separation roller is the roller closest to the front and has a blue plastic sleeve. Locate the separation roller at the top center of the tray cavity. Note: The feed roller and separation roller for Tray 2 are identical. Slide a new roller onto the shaft and rotate it until it locks into place. Squeeze the blue latches on the roller together and slide the roller to the left to remove it. Rotate the roller cover backward and hold it open. Pull Tray 2 out and then up to remove it. Replacing the Tray 2 feed and separation rollers: Reinstall the print cartridge, then close the top cover. Slide the right end of the roller into place (1). Position the transfer roller so the notch on the left end is facing downward.

HP LASERJET P4015N MAINTENANCE KIT ROLLERS ONLY SKIN

Print quality problems could result from skin oil on the roller. Put on the supplied latex gloves and remove the replacement transfer roller from the bag.Ĭaution: Do not touch the new transfer roller with bare hands. Slide the transfer roller to the left and remove it (3). Use the plastic transfer roller tool (1) to slightly lift the left end of the metal shaft (2). Open the top cover and remove the print cartridge. If an optional duplexer is installed, lift it and pull it straight out. Before replacing the fuser, allow the printer cool for a minimum of 30 minutes. Preparing for the maintenance kit installation:Ĭaution: The fuser is hot.

HP LASERJET P4015N MAINTENANCE KIT ROLLERS ONLY INSTALL

The tools recommended for this install are: standard screw driver, one dust cloth, one pair of latex gloves. To order your replacement maintenance kit for this printer, use the following part: A9556 (HP CB388A, CB388-67901) The manufacturer has since removed this roller, considering it unecessary for regular replacement. Ran out of toner? Keep your printer fully functional by refilling your cartridge using HP LaserJet P4015 toner refill kit.Please note: at the time the video was made, this kit included a Bypass Tray Separation Roller (PR #: B8036). The HP LaserJet P4015 needs proper maintenance like any other equipment to maintain its performance. Failing to do so, the message “perform printer maintenance” will appear and prevents you from using your printer.

Resetting your maintenance counter is important for your printer to recognize its newly installed parts. Press “0” and then OK to reset your maintenance count to 0.Navigate the menu list until MAINTENANCE COUNT option appears.To access SERVICE MENU, enter access code: 05401508 on the blank screen and press OK.Press OK when the SERVICE option appears.Pushing the menu button will scroll the menu list. Continue pressing until SERVICE option appears. Go to control panel and push MENU button.Method #2 is then applicable for resetting. If NO New Maintenance Kit option appears on your navigation that means your printer is run by an older firmware version. Navigate by continuously pressing until you see NEW MAINTENANCE KIT option appears on the screen display. Go to the control panel arrow buttons and press UP.

If no LED light is blinking, release OK button.Hold OK button until the 3 LED lights are steady.Once turned on, the printer will start counting its memory (000MB).Plug in the power cord and put the printer power back on.Turn off the printer and remove the power cord.

HP LASERJET P4015N MAINTENANCE KIT ROLLERS ONLY HOW TO

How to do this? Below are easy to follow steps for resetting your P4015 maintenance counter.ĭepending on your firmware revision, 2 methods can be applicable: After installing new parts, resetting the maintenance counter is important to continue the printing service or your printer won’t work. These parts are responsible for paper feed and printing process which also frequently wears out like consumables. This kit includes HP LaserJet P4014 P4015 P4515 fuser, transfer roller, cassette feed/separation rollers and cassette pick-up roller. HP LaserJet P4015 maintenance kit is necessary for maintaining its performance and durability. There are still other parts that wear out in the long run and needs replacing. However, the printer consumables are not the only reason why the P4015 produces excellent printouts. It also works well with after market consumables without any aberration making it even more reliable. It has a printing speed of 50ppm and first page out is at 8.5 seconds. HP LaserJet P4015 is a reputable high-performance monochrome printer.